How to use T UP Assist

1. Adjust Tee Height

Wind the height adjuster screw to the desired mark on the shaft to set the tee height:
III - Driver
II - Fairway & 3 – 6 irons
I - 7 – Pitching Wedge irons,

or you can also disregard the marks and set the height of your choice.

2. Ensure Ball Cage is Closed

Make sure the silver button is pushed down which closes the ball cage.

3. Open Tripod Legs

Open tripod legs by pulling on any one of the three legs and push the leg support bracket down to hold the tripod in place.

4. Insert Tee and Ball

Place T-UP Assist under your arm with the legs facing away from you.

Open the spring-loaded ball cage with your hands and insert the golf ball and tee into the cage.

5. Place on Tee Box

Place T-UP Assist on the tee box with the arrow on the tripod leg facing the direction you are aiming to hit the ball down the fairway.

6. Push Tee into Ground

Place your hand on the top of the handle and push down on the handle. This will push the tee into the ground. If the ground is hard, hold onto the handle while you push down.

8. Tee Off!

Move T-UP Assist from over the ball and place it to the side. You are ready to Tee Off!

9. Pick up Tee

After the ball has been hit the tee can be picked up using the slot in any one of the tripod legs if the tee is still in the ground. If the tee is lying on the ground you can slide the foot at the end of the leg, under the middle of the tee, and lift it up.